Heatmiser NeoStat Programmable Thermostat White 12v

• Heatmiser NeoStat Programmable Thermostat White

• Designed To Allow Control Of Heating System & Zones From Smartphone, Tablet, etc. With Both Retrofit & New Build Markets In Mind
• Heatmiser Neo Consists Of Three Parts: The NeoStat, The NeoHub & The NeoApp
• The NeoStat Replaces Existing Thermostat & A Neo-Stat-HW Replaces The Programmer

• NeoStat Is Mains Powered, So At Least 3 Wires Excluding Earth Are Required At Your Thermostat Position

• The NeoHub Plugs Into A Broadband Router Enabling Remote Access Of Heating Zones & Hot Water From Anywhere At Any Time
• Control Is Via The NeoApp On A Smartphone Or Tablet
• The System Can Be Expanded As Needed By Adding More NeoStats
• Neo Uses A ZigBee-Based Mesh Network To Send Data Back To The NeoHub, So Has Been Designed For Homes Of Any Size
• Additional NeoStats Can Be Added For Total Zone Control Via The NeoApp For iOS Or Android
• No Fixed IP Address Or Specific Network Requirements (e.g. Port Forwarding) Needed, All That Is Necessary Is An Active Broadband Connection, A DHCP Router With A Spare Ethernet Port & An iOS Or Android SmartPhone
• Connection From The NeoApp To The System Uses SSL Security Via A Heatmiser Cloud Server
• 12V Powered Timer With A Volt Free Switch
• Can Be Configured To Work As A Thermostat Or A Timer
• Design Incorporating Soft Touch Keys
• Non Programmable, 5/2 Day, 7 Day & 24 Hour Programming
• 5 Minute Program Intervals
• Self Learning Optimum Start
• 4 Comfort Levels Per Day
• Temperature Hold Facility
• Holiday Facility
• Automatic Blue Back Light (Turns off after 30 seconds)
• Flush Mounting
• °C/°F Selectable
• Key Code Facility
• Frost Protection

Heatmiser Thermostats & Heating Controls